MLEA - Moon Lake Electric Association SLC

Utah Utility Interconnection & net metering rules

Supply Side Taps Allowed1

Line Taps Allowed1

Load Taps Allowed1

Net metering & export

Site Plan Reqs: No specific requirements, MLED would rather see equipment specs than Site Plan

SLD Reqs: PV Panels -> Inverter -> Disconnect -> MSP -> MLED Meter
No specific requirements, MLED would rather see equipment specs than One Line
Line and Load Side Taps Allowed
Supply-Side Taps NOT Allowed
AC Disconnect:
Customer must provide a visible Isolation Switch for the Customer-owned Generation System that meets applicable ANSI For a 6000 Inverter please use a 40A 2P Breaker. There is a shortage of 35A Breakers - 11.23.20

Electric Service Reqs: Moon Lake does not have an offset restriction where they will decline or system offset, but for Net Metering, they do limit the production to 120%
Net Metering Program shall be available to Cooperatives Customers until the combination of all Customer-owned Generation Systems under the Net Metering Program will exceed 120 kW or until Cooperative limits interconnections to a prescribed amount of kW in excess of 120 kW.**Taps:**

Placards: AC Disconnect:
Isolation Switch must be permanently and visibly marked as GENERATOR ISOLATION in letters at least 2" high.
If the Isolation Switch is not adjacent to the electrical service entrance equipment, a permanent/weather resistant map shall be installed at that location detailing where the Isolation Switch is located.