Gaffney BPW
Net metering & export
- Net Metering Allowed
- 1
- NEM Type
- Annual
- TOU Utility
- 1
- Post Solar Billing Method
- Net Metering
- Solar Export Type
- Avoided Cost
- Solar Export Rate Approx
- 0.04
- Solar Export Value Notes
- """On Peak Energy 3.874 cents Off-Peak Energy 2.168 cents"""
- Net Excess Generation Notes
Customer-owned renewable generation shall be first used for Customer’s own load and shall offset Customer’s demand for electricity from the Utility. All electric power and energy delivered by Utility to Customer shall be received and paid for by Customer pursuant to the terms, conditions and rates of the Utility’s applicable rate schedules.
Excess customer-owned renewable generation shall be delivered to the Utility’s electric distribution system. For purposes of this Agreement, the term “excess customer-owned renewable generation” means any kilowatt-hours of electrical energy produced by the customer-owned renewable generation system that is not consumed by Customer and is delivered to Utility’s electric distribution system. PMPA agrees to purchase and receive, and Customer agrees to sell and deliver, all excess customer-owned renewable generation at the energy rate established by PMPA, which shall be calculated in accordance with Schedule A. Excess customer-owned renewable generation shall be billed in the form of a credit on Customer’s monthly electricity consumption bill from Utility.
In the event that a given monthly credit for excess customer-owned renewable generation exceeds the total billed amount for Customer’s consumption in any corresponding month, then the excess credit shall be applied to the subsequent month’s bill. Excess energy credits so produced shall accumulate and be used to offset Customer’s energy consumption bill for a period of not more than twelve (12) months. At the end of each calendar year, unused excess credits shall be paid by Utility to the Customer.
- Rebates Offered
- 0
- Deregulated
- 0
- Allows Standby
- 0
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 1
- Load Taps Allowed
- 0
- Tap Criteria
- Gaffney BPW prefers line taps to be made in the customer panel if possible
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Restrictions
- 20
- System Size Restriction Type
- AC kW
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Type
- No Restrictions
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- Offset Calc Tool
- N/A
Metering & disconnect
- Production Meter Required
- Yes
- Production Meter Criteria
- Bpw requires an additional 100 amp meter base to be installed by to be used as a production meter. Gaffney BPW supplies the meter itself.
- The AC disconnect should be installed between the two electrical meters ( utility meter base & production meter base )
- Production Meter Position
- Inv-PM-Disco-POI
- Production Meter Labeling
- Production Meter
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Visible Lockable Labeled Disconnect
- Allowed Meter Adapter
- None
Plans & docs
- Site Plan Reqs
- The manual disconnect switch shall be mounted separate from the meter socket on an exterior surface adjacent to the meter.
- SLD Reqs
Relay Meter Orientation = Over/Under
- Bpw requires an additional 100-amp meter base to be installed by contractor to be used as a production meter. (Gaffney BPW supplies the meter itself.)
- PV meter base. The source/line side of meter base is to be wired toward the solar panel inverters. The load side wires are to go toward the utility.
- The ac disconnect should be installed between the two electrical meters (utility meter base & production meter base)
- Meter Num Req SLD 3LD
- 0
- ESID Num Req SLD 3LD
- 0
- Website
- link
- Phone
- (864) 488-8800
Other details
- Restrict Inspection
- 0
- Revision Required
- 0
- Mod Swap Requires Planset
- 1
- Address ID
- 1670341
- Express Planset Eligible
- No