The Energy Cooperative

Net metering & export

Net Metering Allowed

1

NEM Type

Annual

Post Solar Billing Method

Net Metering

Solar Export Type

Avoided Cost

Net Excess Generation Notes

The meter on the facility is changed to an electronic meter that records the power the member draws off the grid and the amount of power the member generates back on to the grid. The two readings are used to determine the billing.

The Cooperative bills the Member for the energy supplied by the Cooperative over and above the energy supplied by the Member. This process occurs during each billing period according to the Cooperative’s applicable retail rate schedule.

If/when the energy supplied by the Member exceeds the energy supplied by the Cooperative during a billing period, the monthly charge and/or minimum bill of the retail rate schedule shall be billed by the Cooperative. If the energy placed on to the grid is greater than the amount drawn from the grid, the excess energy shall be credited at an avoided cost rate

Rebates Offered

0

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Supply Side Taps Allowed

0

Line Taps Allowed

0

Load Taps Allowed

0

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

25

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

System Offset Notes

No more than 120% of the member's yearly usage. The system cannot be larger than 25kW.

Offset Calc Tool

Historical Usage

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Meter Spot Process

TDR Process Call member services

TDR - Who to

TDR - Applications/Documents Req N/A

TDR - ETA of notice required for request 48 hours

TDR - Who can schedule? Does not matter

TDR - ETA of Utility Scheduling TDR N/A

Allowed Meter Adapter

None

Plans & docs

SLD Reqs

Installation, at the Member’s expense, of a visible break disconnect switch is required. The switch must be lockable and located within three (3) feet from the Cooperative’s meter, and must be properly labeled as “Utility Disconnect Switch”.

Install Reqs

You are only required to install the meter socket as the meter will already installed, we just need to program it for net metering once the solar installation is complete.

Placards

The AC disconnect switch must be labeled "UTILITY DISCONNECT SWITCH".

Equipment Approvals

California Energy Commission

Website

link

Phone

(800) 255-6815

Other details

Restrict Inspection

0

Revision Required

0

Mod Swap Requires Planset

1

Address ID

299869

Express Planset Eligible

Yes