South Central Power Company

Net metering & export

Net Metering Allowed

0

NEM Type

N/A

TOU Utility

0

Post Solar Billing Method

Export Rate

Solar Export Type

Avoided Cost

Solar Export Value Notes

will be purchased by Buckeye power @ Avoided cost

Net Excess Generation Notes

The Power Company shall use an hourly kWh period to measure the Consumer’s net production. The net production output shall be measured by determining during each such period the production in kilowatt-hours (kWh) of the Electric Generating Facility in excess of the requirements of the Consumer’s electric consumer facilities. Any such output of the Electric Generating Facility in excess of the requirements of Consumer’s electric consuming facilities shall be sold to Buckeye Power, Inc. The Power Company shall bill the net electric usage pursuant to the Power Company’s applicable Net Billing Rate Schedule, and credit the net electric output at Buckeye’s purchase rate.

Rebates Offered

0

Deregulated

1

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Line Taps Allowed

0

Load Taps Allowed

0

MPU Rules

• If removal of a meter is necessary during the interconnection installation, contact them Power at to schedule a temporary disconnect

Automatic Transformer Upgrade Size

0

Meter Aggregation Allowed

0

System size & offset

System Size Restrictions

25

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

Combination

Offset Value

120

Offset Calculation Basis

Historical

Offset Calculation Period

12

Industry Standard Watts Sqft

2

Inverter Oversize Restrictions

0

System Offset Notes

Offset Calc Tool

Historical Usage

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

AC Disconnect Required

Yes

AC Disconnect Labeling

Visible Lockable Labeled Disconnect

Meter Spot Required

1

Allowed Meter Adapter

None

Plans & docs

SLD Reqs

• The diagram must include the design on the member’s side of the meter, including a visible, lockable AC disconnect.

TAPS

• South Central Power does not permit hard tapping or tap connectors of service entrance conductors prior to the first means of disconnect. If you choose to do a source-side connection, it may be established through approved bus lug connectors.
• Prefers load-side interconnection

Electric Service Reqs

Placards

NEC standards

Electrical Stamp Required

0

Equipment Approvals

California Energy Commission

Meter Num Req SLD 3LD

0

ESID Num Req SLD 3LD

0

Website

link

Phone

(800) 282-5064

Other details

Restrict Inspection

0

Revision Required

0

Mod Swap Requires Planset

1

Address ID

650526

Express Planset Eligible

Yes