AES Ohio (Dayton Power and Light)

Net metering & export

Net Metering Allowed

1

NEM Type

Monthly

Post Solar Billing Method

Net Metering

Net Excess Generation Notes

Customer-Generators of electricity are eligible to be billed on a "standard net metering" basis. "Standard net metering" means measuring the difference in an applicable billing period between the electricity supplied by the Company and the electricity generated by a Customer-Generator that is fed back to the Company. Standard net metering shall be accomplished using a single meter capable of registering the amount (flow) of electricity which flowed in each direction during a billing period.

If the Customer-Generator provides more electricity to the Company than the Company provides to the Customer-Generator, only the excess generation component shall be allowed to accumulate as a credit until netted against the Customer-Generator’s bill, or until the Customer-Generator requests in writing a refund that amounts to, but is no greater than, an annual true-up of accumulated credits over a 12 month period. Bill charges or credits will be in accordance with the Generation Standard Offer Service Schedule that would apply if the Customer were not a Customer-Generator.

Rebates Offered

0

Deregulated

1

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Supply Side Taps Allowed

0

Line Taps Allowed

1

Load Taps Allowed

0

Tap Criteria

Taps allowed, tap box required.

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

0

System Size Restriction Type

No Restrictions

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

Percentage

Offset Value

120

Offset Calculation Basis

Historical

Offset Calculation Period

12

Industry Standard Watts Sqft

2

Inverter Oversize Restrictions

1

System Offset Notes

120% of historical usage

Offset Calc Tool

PV Watts

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Allowed Meter Adapter

None

Plans & docs

SLD Reqs

A one-line diagram showing the configuration of the proposed DG system, including the protection and controls, disconnection devices, nameplate rating of each device, power factor rating, transformer connections, and other information deemed relevant by the Interconnection Service Customer

Electric Service Reqs

AES requires an MPU permit for MPU work

Install Reqs

A disconnect switch to isolate the DG equipment for purposes of safety during maintenance and during emergency conditions. The Company may require a disconnect device to be provided, installed by, and paid for by the customer, which is accessible to and lockable by Company personnel, either at the primary voltage level, which may include load-break cutouts, switches and elbows, or on the secondary voltage level, which may include a secondary breaker or switch. The switch must be clearly labeled as a DG disconnect switch.

Placards

AC Disconnect must be labeled "DG DISCONNECT SWITCH".

Equipment Approvals

California Energy Commission

Website

link

Phone

(800) 433-8500

Other details

Restrict Inspection

0

Address ID

299369

Express Planset Eligible

Yes