Piedmont Electric

Net metering & export

Post Solar Billing Method

Export Rate

Solar Export Type

Fixed kWh

Solar Export Rate

0.347

Net Excess Generation Notes

"Interconnection Charge 25kW or less - $5.00

Interconnection Facilities Charge Over 25kW - $ 10.00 per month

Excess Facilities Charge Over 25kW- 2.0% times Cooperative’s cost of Excess Facilities

Standby Charge Over 25kW- $ 1.75 per kW"

"The nameplate rating of the Renewable Generation must be 25 kW or less.

Excess Energy shall be defined as energy produced by the consumer’s generator that exceeds the energy used by the consumer at any given time, the end result of which would be energy delivered to the Cooperative. In the event that Excess Energy was delivered to the Cooperative at the end of the billing period, the Cooperative will pay the consumer for the amount of Excess Energy delivered at the Energy Credit Rate

Energy Credit:

Excess Energy 3.47¢ per kWh

Renewable Energy Certificates:

For renewable generators served under this Rider, the Cooperative shall have the first right of refusal for any renewable energy certificates (RECs) and any environmental attributes produced as a result of the energy generated by the renewable generation. Payments and/or credits for the RECs and any environmental attributes produced as a result of the energy generated by the renewable generation shall be at the rate stated below. Prior to any payments and/or credits for RECs or any environmental attributes produced, the Renewable Generator must be registered with the North Carolina Utilities Commission using NC-RETS and notification of a REC transfer from NC-RETS must have been received by the Cooperative. Consumers receiving compensation for the RECs from the Cooperative shall not be eligible to participate in NC GreenPower’s renewable generation programs.

Renewable Energy Certificate (REC) Credit:

All RECs per month 1.00 ¢ per kWh

The Cooperative will furnish, install, own, and maintain metering to measure the kilowatthours delivered by the Cooperative to the consumer, and if applicable, the kilowatt demand. The Cooperative will also furnish, install, own, and maintain additional metering equipment to measure the kilowatt-hours delivered from the consumer to the Cooperative. The consumer’sservice may be metered with: (a) a single, bi-directional meter, which records independently the flow of electricity in each direction through the meter; or (b) at the Cooperative’s option, two meters, equipped to prevent reverse registration, one which will measure the energy delivered by the Cooperative to the consumer, and the other which will measure the energy delivered by the consumer to the Cooperative. The Cooperative shall have the right to install special metering and load research devices on the consumer’s equipment and the right to use the consumer’s telephone line for communication with the Cooperative’s and the consumer’s equipment.

"

Rebates Offered

No

Deregulated

No

Interconnection & taps

Approval Req To Install

Yes

Supply Side Taps Allowed

No

Line Taps Allowed

No

Load Taps Allowed

No

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

25

System Size Restriction Type

AC kW

System Size Battery Included

No

System Size Includes Existing Systems

No

Offset Type

No Restrictions

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

Utility Specific Adjustments

Oversize may be submitted for review if load justification is provided. Oversize does not benefit the customer payback rate.

System Size Justification

Load Justification

System Offset Notes

Offset Calc Tool

PV Watts

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

Allowed Meter Adapter

None

Plans & docs

Equipment Approvals

California Energy Commission

Meter Num Req SLD 3LD

No

ESID Num Req SLD 3LD

No

Website

link

Phone

(800) 222-3107

Other details

Revision Required

Yes

Mod Swap Requires Planset

Yes