Duke Energy Progress NC
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correction Net Metering AllowedYes
Line Taps AllowedNo
Load Taps AllowedNo
Net metering & export
- Net Metering Allowed
- Yes
- Post Solar Billing Method
- Net Metering
Interconnection & taps
- Approval Req To Install
- Yes
- Line Taps Allowed
- No
- Load Taps Allowed
- No
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- System Offset Notes
- The rated capacity of the generating system shall not exceed the lesser of the customer’s estimated maximum annual kilowatt demand or 1,000 kilowatts
- Offset Calc Tool
- Historical Usage
Plans & docs
- SLD Reqs
- Model numbers Nameplate sizes of equipment, including number and nameplate electrical size information for solar panels, inverters, wind turbines, disconnect switches, etc. The metering arrangement required whether installed on the customer side of the existing meter (“net metering/billing”) or directly connected to the grid through a new delivery point requiring a separate meter
- Install Reqs
- Requirements for Disconnect Switch A clear, visible open point of disconnection A clear, visible indication of switch position Padlock provisions for locking the switch in the open position Installed on the interconnection customer's side of the electrical interconnection with the utility's system, accessible to utility personnel Located in close proximity to the utility's electrical delivery point Labeled "Generator Disconnect Switch" The switch may isolate the interconnection customer and its associated load from the utility's system or disconnect only the generator from the utility's system and shall be accessible to the utility at all times.
- Website
- link
- Phone
- (866) 233-2290