Montana-Dakota Utilities Co.
Net metering & export
- Net Metering Allowed
- 1
- NEM Type
- Annual
- TOU Utility
- 0
- Post Solar Billing Method
- Net Metering
- Net Excess Generation Notes
If the energy supplied by the customer generator exceeds the amount of energy supplied by the Company, the net Kwh shall be credited to the customer’s next monthly bill. The balance of the energy generated shall appear as a credit on the customer’s account until the customer’s consumption offsets the credit or the end of the designated 12-month billing period, which ever occurs first. At the end of the 12-month period any unused Kwh credit accumulated during the previous 12-months will be granted to the Company with no compensation to the customer. The customer shall designate the start date of the 12-month billing period as January 1, April 1, July 1 or October 1.
- Rebates Offered
- 0
- Deregulated
- 0
- Allows Standby
- 0
Interconnection & taps
- Approval Req To Install
- Yes
- Interconnection Level
- 3
- Line Taps Allowed
- 0
- Load Taps Allowed
- 0
- Automatic Transformer Upgrade Size
- 0
System size & offset
- System Size Restrictions
- 0
- System Size Restriction Type
- No Restrictions
- System Size Battery Included
- 0
- System Size Includes Existing Systems
- 0
- Offset Type
- Percentage
- Offset Value
- 100
- Offset Calculation Basis
- Historical
- Offset Calculation Period
- 12
- Industry Standard Watts Sqft
- 2
- System Offset Notes
The proposed small generator facility must not exceed the capacity of the existing service.
- Offset Calc Tool
- Historical Usage
Metering & disconnect
- Production Meter Required
- No
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Visible Lockable Labeled Disconnect
- Allowed Meter Adapter
- None
Plans & docs
- Site Plan Reqs
Standard (not required for interconnection submittal)
- SLD Reqs
Standard, must show the following:
- Service line, Meter, Load centers, Inverters, Generators and Disconnect Switch
- Electric Service Reqs
Disconnect Required:
- Must include a disconnect device.
- Disconnect device shall be capable of isolating the small generation facility from the distribution system.
- Must allow for a visible break and must have the ability to be locked open.
- Location shall be within ten feet of the utility meter unless special permission is granted by the utility.
- Electrical Stamp Required
- 0
- Equipment Approvals
- California Energy Commission
- Meter Num Req SLD 3LD
- 0
- ESID Num Req SLD 3LD
- 0
- Website
- link
- Phone
- (406) 359-3126
Other details
- Revision Required
- 1
- Mod Swap Requires Planset
- 1
- Address ID
- 4777643
- Express Planset Eligible
- Yes