Anoka Municipal Utility
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correctionNet metering & export
- Net Metering Allowed
- Yes
- NEM Type
- Annual
- TOU Utility
- No
- Post Solar Billing Method
- Net Metering
- Net Excess Generation Notes
A qualifying facility having less than 40-kilowatt capacity, the customer shall be​ billed for the net energy supplied by the utility according to the applicable rate schedule for sales to that​ class of customer. A customer with a qualifying facility or net metered facility having a capacity below 40 kilowatts​ that is interconnected to a cooperative electric association or a municipal utility may elect to be compensated​ for the customer's net input into the utility system in the form of a kilowatt-hour credit on the customer's​ energy bill carried forward and applied to subsequent energy bills. Any kilowatt-hour credits carried forward​ by the customer cancel at the end of the calendar year with no additional compensation.
- Rebates Offered
- No
- Deregulated
- Yes
Interconnection & taps
- Approval Req To Install
- Yes
- Line Taps Allowed
- No
- Load Taps Allowed
- No
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- No
System size & offset
- System Size Restrictions
- 40
- System Size Restriction Type
- AC kW
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Value
- 0
- Offset Calculation Period
- 0
- Industry Standard Watts Sqft
- 2
- System Offset Notes
40 kW AC max
Systems over 40 kW will have a 120% offset requirement
For interconnection of a proposed DER to a radial distribution circuit, the aggregated generation, including the proposed DER, on the circuit shall not exceed 15% of the line section annual peak load as most recently measured or 100% of the substation aggregated minimum load. A line section is that portion of an Area EPS Operator’s electric system connected to a customer bounded by automatic sectionalizing devices or the end of the distribution line. The Area EPS Operator may consider 100% of applicable loading (i.e. daytime minimum load for solar), if available, instead of 15% of line section peak load.
- Offset Calc Tool
- Historical Usage
Metering & disconnect
- Production Meter Required
- Situational
- Production Meter Criteria
- Production meters are required for 20kW or more, or at utility's discretion
- Customer may request a production meter even if the utility does not require one
- Production Meter Position
- Inv-Disco-PM-POI
- Production Meter Labeling
- Production Meter
- AC Disconnect Required
- Yes
- AC Disconnect Labeling
- Utility Disconnect Switch
Plans & docs
- Site Plan Reqs
- SLD Reqs
- Applicant name.
- Application ID.
- Installer name and contact information.
- Address where DER system will be installed - must match application address. o Be sure to list the address for the protective interface equipment if the protective interface equipment is located at a different address than the DER system.
- Correct positions of all equipment, including but not limited to panels, inverter, and DC/AC disconnect. Include distances between equipment, and any labeling found on equipment.
One-line diagram must be signed and stamped by a Professional Engineer licensed in Minnesota if the DER is uncertified greater than 20 kW AC or if certified system is over 250 kW
- Electric Service Reqs
IEEE 1547
IEEE C37
IEEE C57
IEEE C62
IEEE 519
UL 1741
NFPA 70 (2017)
ANSI C84.1
NEMA MG 1
- Electrical Stamp Required
- No
- Equipment Approvals
- California Energy Commission
- Meter Num Req SLD 3LD
- No
- ESID Num Req SLD 3LD
- No
- Rate Schedule Link
- link
- Website
- link
- Phone
- (763) 576-2750
Other details
- Revision Required
- Yes
- Mod Swap Requires Planset
- Yes