Village of Rantoul Light & Water Utilities

Illinois Utility Interconnection & net metering rules

Spot something wrong?

Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.

Report a correction

Net Metering AllowedNo

Line Taps AllowedNo

Load Taps AllowedNo

AC Disconnect RequiredYes

Net metering & export

Net Metering Allowed: No

TOU Utility: No

Post Solar Billing Method: Export Rate

Solar Export Type: Avoided Cost

Net Excess Generation Notes: Energy generated by the customer-owned generator during the billing period may supply all or a portion of the energy required by the customer’s load. The customer shall be credited for excess energy delivered by the customer to Village at the meter from the approved on-site generating facility. A credit shall be created and applied to the customer's bill based upon the lesser or the retail rate and the avoided cost. The Village shall carry over any unused credits earned and apply those credits to subsequent billing periods to offset usage based electric energy (kWh) charges only for electric energy supplied to the customer by the Village until all credits are used or until the end of the annual period. The annual period shall end each year on April 30.

Rebates Offered: Yes

Deregulated: No

Allows Standby: No

Interconnection & taps

Approval Req To Install: No

Line Taps Allowed: No

Load Taps Allowed: No

Automatic Transformer Upgrade Size: 0

Meter Aggregation Allowed: No

System size & offset

System Size Restrictions: 125

System Size Restriction Type: Percent

System Size Battery Included: No

System Size Includes Existing Systems: No

Offset Value: 0

Offset Calculation Period: 0

Industry Standard Watts Sqft: 2

System Offset Notes: 125% of the prior year’s annual kWh consumption or 25 kW AC (whichever is less)

Offset Calc Tool: Historical Usage

Metering & disconnect

Production Meter Required: No

Production Meter Position: N/A

Production Meter Labeling: N/A

AC Disconnect Required: Yes

AC Disconnect Labeling: Utility Disconnect Switch

Meter Spot Required: No

Plans & docs

Site Plan Reqs: Standard

SLD Reqs: Standard

Electric Service Reqs: All interconnections shall comply with codes established by National Electrical Code (NEC), National Electrical Safety Code (NESC), Institute of Electrical and Electronics Engineers (IEEE)(particularly IEEE 1547), and Underwriters Laboratories (UL)

Electrical Stamp Required: No

Equipment Approvals: California Energy Commission

Meter Num Req SLD 3LD: No

ESID Num Req SLD 3LD: No

Rate Schedule Link: link

Website: link

Phone: (217) 892-6800

Other details

Revision Required: Yes

Mod Swap Requires Planset: Yes