Tri-County Electric Cooperative, Inc (IL)

Net metering & export

Net Metering Allowed

1

NEM Type

Annual

TOU Utility

1

Post Solar Billing Method

Net Metering

Net Excess Generation Notes

If the eligible member is a net seller of electricity during the billing period, the cooperative will calculate a monetary credit for any metered excess kilowatt-hours of electric energy delivered to the cooperative at a rate equal to the per kilowatt-hour energy charge as shown on the applicable month's SIPC power bill and apply such credit against only the electric energy charges derived specifically from the consumption of electric energy measured in units of kilowatt hours as denoted on a subsequent bill for service to the eligible member. The cooperative shall continue to carry over any unused amount of such credits and apply those credits to subsequent billing periods to offset only any electric energy-related charges derived specifically from the consumption of electric energy measured in units of kilowatt-hours due from the eligible member as denoted in the billing for those subsequent billing periods until all credits are used or until the end of the annual period, whichever occurs first.

At the end of the annual period that service is supplied by means of net metering, or in the event that the eligible member terminates service with the cooperative during an annual period, any remaining credits in the member's account shall expire and no credit or payment shall be due to the member for such expired credits.

Rebates Offered

0

Deregulated

0

Allows Standby

1

Interconnection & taps

Approval Req To Install

Yes

Interconnection Level

3

Supply Side Taps Allowed

0

Line Taps Allowed

1

Load Taps Allowed

1

Automatic Transformer Upgrade Size

0

System size & offset

System Size Restrictions

40

System Size Restriction Type

AC kW

System Size Battery Included

0

System Size Includes Existing Systems

0

Offset Type

No Restrictions

Offset Value

0

Offset Calculation Period

0

Industry Standard Watts Sqft

2

System Offset Notes

Metering & disconnect

Production Meter Required

No

Production Meter Position

N/A

Production Meter Labeling

N/A

AC Disconnect Required

Yes

AC Disconnect Labeling

Visible Lockable Labeled Disconnect

Meter Spot Required

1

Meter Spot Process

Temporary Disconnect Reconnect Process (TDR) You will need to call our operations department ) to schedule any required temporary disconnects or reconnects. Typically we would require at least 2 days notice. No fees as long as its during business hours (8am-2pm for service calls)

TDR - Who to

TDR - Applications/Documents Req N/A

TDR - ETA of notice required for request 2 days

TDR - Who can schedule? Does not matter

TDR - ETA of Utility Scheduling TDR N/A

Allowed Meter Adapter

None

Plans & docs

Site Plan Reqs

• Show the disconnect locations in relation to the meter and inverter

SLD Reqs

• Include wiring details (wire sizes, disconnect rating)
• Identify if the connection is line-side or load-side

Install Reqs

Electrical Stamp Required

0

Equipment Approvals

California Energy Commission

Meter Num Req SLD 3LD

0

ESID Num Req SLD 3LD

0

Website

link

Phone

(800) 244-5151

Other details

Restrict Inspection

0

Address ID

601275

Express Planset Eligible

Yes