RRE - Raft River Rural Electric Co-op
Spot something wrong?
Tariffs and interconnection rules move often. If something here is out of date or missing, tell us and we'll fix it.
Report a correctionNet metering & export
- Net Metering Allowed
- No
- TOU Utility
- No
- Post Solar Billing Method
- Export Rate
- Solar Export Type
- Avoided Cost
- Solar Export Rate Approx
- 0.0146
- Solar Export Value Notes
- Rates will be reviewed each January and adjusted if needed, based on board approval.
- Net Excess Generation Notes
Energy will be paid at the wholesale cost per KWH based on the past calendar years wholesale rate.
- Rebates Offered
- No
Interconnection & taps
- Approval Req To Install
- Yes
- Supply Side Taps Allowed
- Yes
- Line Taps Allowed
- Yes
- Load Taps Allowed
- Yes
- Automatic Transformer Upgrade Size
- 0
- Meter Aggregation Allowed
- Yes
System size & offset
- System Size Restrictions
- 0
- System Size Restriction Type
- No Restrictions
- System Size Battery Included
- No
- System Size Includes Existing Systems
- No
- Offset Type
- Percentage
- Offset Value
- 100
- Offset Calculation Basis
- Historical
- Offset Calculation Period
- 12
- Industry Standard Watts Sqft
- 2
- Offset Calc Tool
- N/A
Metering & disconnect
- Production Meter Required
- No
- Production Meter Position
- N/A
- Production Meter Labeling
- N/A
- Allowed Meter Adapter
- None
Plans & docs
- Site Plan Reqs
Proposed location
Details of conditions for the installation and other environmental factors.
Proposed details of interconnection
- SLD Reqs
Source of driving energy and anticipated electrical capacity of the system.
Number of phases; manufacturer’s technical data; including control, circuit and safety information
For a 6000 Inverter please use a 40A 2P Breaker. There is a shortage of 35A Breakers - 11.23.20
- Electric Service Reqs
Stand-alone meters must receive an MPU in Utah
Phases:
Systems may be single or three phase except where single phase will cause unacceptable imbalance or three phase interconnection is not reasonably available.
Safety Considerations for systems 10kW and less:
The owner’s system shall be protected so that a short circuit due to any cause, will not damage the generator or any of its equipment.
In the event the Utility’s source of energy is lost the generating system must be electronically disconnected from the Cooperative’s lines until the source can be reestablished.
Safety Considerations for systems 10kW or more:
Phase failure/reversal and voltage imbalance protection must be provided by the owner.
A disconnect that the Cooperative can control just be provided which will allow the Cooperative to lock the generator off the distribution lines.
In the event the Cooperative’s source of energy is lost, the generating system must be electrically disconnected from the Cooperative’s lines until the source can be reestablished.
Taps:
Line and Load Side Taps allowed
Supply Side Taps
- Rate Schedule Link
- link
- Website
- link
- Phone
- (208) 645-2211
Other details
- Revision Required
- Yes
- Mod Swap Requires Planset
- Yes