Town of Hempstead (NY)

New York Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2023

Fire Code Version2018 Building Code

Wet Stamps RequiredDigital Structural

Fire Setback Enforced1

Codes

NEC Code Version: 2023

Fire Code Version: 2018 Building Code

Code List

2025 NEW YORK STATE BUILDING CODE

2025 NEW YORK STATE RESIDENTIAL CODE

2025 NEW YORK STATE FIRE CODE

2025 NEW YORK STATE ENERGY CONSERVATION CODE

2025 NEW YORK STATE EXISTING BUILDING CODE

2025 NEW YORK STATE FUEL GAS CODE

2025 NEW YORK STATE MECHANICAL CODE

2025 NEW YORK STATE PLUMBING CODE

2025 NEW YORK STATE ENERGY STANDARD FOR SITES AND BUILDINGS EXCEPT LOW-RISE RESIDENTIAL BUILDINGS

2023 NATIONAL ELECTRICAL CODE

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

How Many Plansets Required: 1

Revision Required: 1

New Planset Required For Module Swap: 0

Stamps

Ee Stamp Required On SLD: No

Wet Stamps Required: Digital Structural

Structural Calculations Required: Yes

Stamp Location On Plans: Unspecified

Date On Stamps: Expiration Date

Fire setbacks

Fire Setback Enforced: 1

Setback Notes: Standard

Structural & loads

Wind Speed: 120

Snow Load: 25

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Structural Notes: Stamps/Calcs required Additional PE documents required (blank forms can be found in the files section below): * **A stamped _ _Design Professional Certificate of Compliance__** * **A stamped _ _Permits Without Examination Form__** * _W_ hich needs to be on the Professional Engineer's letterhead and be worded as building dept has constructed. The letterhead needs to consist of more than just the name of the company placed on the top of the document. * Needs to include company info i.e. address, phone number, email address, website, etc. * Needs to be consistent and the company name not on the left top side on one and then middle or right top side on the next. * Only fill and sign the top half of the form, the bottom half of the form with the second signature line and notary portion will be filled out by the permit applicant. All revisions will require a resubmission letter signed and sealed by the PE detailing all changes made and the page numbers they occurred on.

Minimum Ground On Roof: #10

Electrical

Electrical Load Calcs Required: Derates

Allowed POI: Line Side Taps,PV Breaker,Meter Adapter,Load Side Taps

Panel Schedule Required: Partial Home Backup

Temperature Rating: 90

De Rating Ampacity: 0.91

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard

Separate ESS Disconnect Required: ESS Disconnect

ESS Elevation Detail Required: No

Plan set

Custom Placards Required: 1

Placards Notes: Meter placards are required for certain circumstances. They seem to be required when the BOS equipment is not near the meter and/or there are separate disconnects on detached structures.

Ground mount

Ground Mount Fencing Required: Mesh/Scrim