Village of Carrier Mills (IL)

Illinois Authority Having Jurisdiction Solar permitting requirements

NEC Code Version2014

Fire Code Version2015 Building Code

Wet Stamps RequiredNone

Fire Setback Enforced1

Codes

NEC Code Version: 2014

Fire Code Version: 2015 Building Code

Code List

2015 INTERNATIONAL BUILDING CODE

2015 INTERNATIONAL ENERGY CONSERVATION CODE

2015 INTERNATIONAL FIRE CODE

2015 INTERNATIONAL SOLAR ENERGY PROVISIONS AND ORDINANCE

2015 INTERNATIONAL RESIDENTIAL BUILDING CODE

2014 NATIONAL ELECTRICAL CODE

IEBC Accepted: 1

ASCE Code Specification: ASCE 7-16

SolarAPP+ & submittal

How Many Plansets Required: 2

Revision Required: 0

New Planset Required For Module Swap: 0

Stamps

Ee Stamp Required On SLD: No

Wet Stamps Required: None

Structural Calculations Required: No

Fire setbacks

Fire Setback Enforced: 1

Structural & loads

Wind Speed: 107

Wind Notes: https://ascehazardtool.org/

Snow Load: 24

Snow Load Notes: https://ascehazardtool.org/

Reducible Snow Load Allowed: 1

Max Attachment Spacing: 96

Minimum Ground On Roof: #10

Electrical

AC Disconnect Required: No

Electrical Load Calcs Required: Derates

Allowed POI: Load Side Taps,PV Breaker,Line Side Taps,Meter Adapter

Supply Tap Neutral Ground Bond Required: 1

Temperature Rating: 90

De Rating Ampacity: 0.91

BOS Restrictions: Standard

Battery / ESS

Unique Battery Placards Needed: 0

ESS Notes: Standard ESS Requirements

Separate ESS Disconnect Required: No

ESS Elevation Detail Required: No

Plan set

Plan Set Requirements: CHECK LIST REQUIRED ----> CHECKLIST

Cover Page: Standard

Site: Standard

Roof Plan

ALL JOBS - Include the total number of attachments and the total weight of the PV system.

To calculate total weight, multiply the distributed weight * total array area:

EX) TOTAL ARRAY AREA: 588.54 SQ FT x SYSTEM DISTRIBUTED WEIGHT: 2.76 LBS = Total System Weight of 1624.37 LBS

To calculate number of attachments in a single row, divide the width of the row in inches by the attachment spacing. Round up and multiply by two. Do this for each row of modules and add them all up.

Attachment Detail: Standard

Electrical Diagram: Standard

Label Page: Standard

Custom Placards Required: 0

Ground mount

Ground Mount Fencing Required: No

Ground Mount Notes: Standard Ground Mount requirements

Setback Front Yard: 10

Setback Back Yard: 5

Setback Side Yard: 5