City of Clearwater (FL)
Codes
- NEC Code Version
- 2020
- Fire Code Version
- 2018 Building Code
- Code List
2023 8TH EDITION FLORIDA BUILDING CODE: BUILDING
2023 8TH EDITION FLORIDA BUILDING CODE: RESIDENTIAL
2023 8TH EDITION FLORIDA BUILDING CODE: MECHANICAL
2023 8TH EDITION FLORIDA BUILDING CODE: PLUMBING
2023 8TH EDITION FLORIDA BUILDING CODE: FUEL GAS
2023 8TH EDITION FLORIDA BUILDING CODE: ENERGY CONSERVATION
2023 8TH EDITION FLORIDA BUILDING CODE: EXISTING BUILDING
2023 8TH EDITION FLORIDA BUILDING CODE: ACCESSIBILITY
2023 8TH EDITION FLORIDA FIRE PREVENTION CODE (NFPA)
2020 NATIONAL ELECTRIC CODE (NEC)
- ASCE Code Specification
- ASCE 7-16
SolarAPP+ & submittal
- How Many Plansets Required
- 3
- Revision Required
- 1
- Rough Inspection
- None
- New Planset Required For Module Swap
- 1
Stamps
- Ee Stamp Required On SLD
- Yes
- Wet Stamps Required
- Digital Structural,Digital Electrical
- Structural Calculations Required
- Yes
- Ee Stamp Notes
Digitally Verified Signature
- Stamp Location On Plans
- Unspecified
- Date On Stamps
- Expiration Date
Fire setbacks
- Fire Setback Enforced
- 1
- Setback Notes
09/23/20 - Per convo with plans reviewer staff, fire setbacks must be 1.5 feet on both sides of the ridge or valley between mounting planes that have panels on them.
Structural & loads
- Wind Speed
- 145
- Wind Notes
Exposure Category C ; HVHZ
- Snow Load
- 0
- Reducible Snow Load Allowed
- 1
- Max Attachment Spacing
- 48
- Structural Notes
PE Stamps; SE & EE digital stamps on all PV pages, FL Statute & PE Letter / Calcs. WS 145 MPH
Digitally Verified Signature
- Minimum Ground On Roof
- #10
Electrical
- AC Disconnect Required
- Conditional
- Electrical Load Calcs Required
- Derates
- Allowed POI
- Line Side Taps,PV Breaker,Load Side Taps
- Panel Schedule Required
- Partial Home Backup
- Temperature Rating
- 90
- De Rating Ampacity
- 0.96
Battery / ESS
- Unique Battery Placards Needed
- 0
- ESS Notes
Standard
- Separate ESS Disconnect Required
- ESS Disconnect
- ESS Elevation Detail Required
- No
Plan set
- Plan Set Requirements
Remove any wording concerning POI method subject to change
- Roof Plan Notes
Layout subject to change.
- Electrical Diagram
* PV disconnect requires main bonding jumper per 2017 NEC 250.24 (B). Bond ground to neutral in PV disconnect. * AHJ no longer accepts the note "IX method subject to change". Delete the note if it populates on the plans.
- Label Page Notes
Shall meet the requirement of NFPA 1 2015 edition section 11.12.2.1.5 Installer Information
- Custom Placards Required
- 1
- Placards Notes
(2) site map placards required ORDER CUSTOM PLACARDS THRU HERE send file and Specify custom placard size ( 6x8 ) send address to ship to aswell.
- Non Standard Revision Requirements
Resubmission letter must list the pages that any changes were made on. All changes must be clouded.
Ground mount
- Ground Mount Fencing Required
- Mesh/Scrim